|
Working closely with steel manufacturers to develop new combinations
For increased tool life, High chip loads, Very High Surface Speeds, Reduced tool cost per part, and Higher productivity than carbide.
Acedes Acealloy 240
Designed for Dry Hobbing
Acedes Acealloy V8
Designed for wet Hobbing, Milling and Shaping. Gives up to 20% better performance than ASP2030.
Uses standard TiN, TiCN or Futura coatings. Minimal cost difference to ASP2030.
Acedes Acealloy V6
Designed for shaving tools
We have seen results of up to 100% improvement in tool life using this
material on identical tools made from conventional M2, M4 or ASP2023.
Machining Data (SAE8620)
DRY at 280 Mtrs/Min (918 surface feet per minute) with a chip size of 0.160mm (0.0062").
WET in excess of 200 M/Min (796 sfpm) roughing and 300 M/Min (984 sfpm) finishing.
Flexibility
We will react from a phone call, fax or email, and endevour to get the quote
back within 24 hours. On receipt of order the finished tool will be delivered to the customer within an agreed period. In the case of an emergency an express manufacture can be purchased.
|
